Medium Duty Floor Cable Protector, 1.8m, 30mm x 10mm, Black / Yellow

Part Code: FC83H

Stock Availability
Product Details
Part Code: FC83H
  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • Prevent cable insulation damage/electrocution and risk of broken conductor strands
  • 30mm x 10mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • No sharp kerb-effect, pedestrian friendly
  • Fully safety tested and certified to BS EN 60670-1:2005

Ideal for up to 3x 8mm diameter cables, this versatile Cable Protector is supplied with connector pins so it can be cut to shorten, then reconnected or combined with other lengths to make longer runs.

The hazard stripe gives greater visibility to pedestrians.

Available in 1.8m lengths, or 9m length options.

Supplied with connector pins, so lengths can be joined to make longer runs.

Colour Black / Yellow
Height 14mm
Inner Channel Size 10mm x 30mm
Length 1.8mm
Material PVC (Polyvinyl Chloride)
Width 83mm