SDS Chisels

9 Items

Armeg

20mm SDS+ Extended Channelling Chisel

(G310B4CCSB)

Ideal for rapidly producing a 20mm channel in masonry for running cables behind skirting boards or ceiling coving
The extended shank and angle enables the user to reach behind even deep skirting and covings
Cranked off set design maximises ease of use
Designed on an SDS Plus Drive System for machines with roto-stop facility
Can be used in: soft brick, medium density block, lightweight block and natural stone

£55.28 Incl. VAT

Determining stock availability

Armeg

250mm SDS+ Chisel

(G250B4C)

Ideal for general masonry removal work
An everyday essential chisel, perfect for transmitting the hammer blow of SDS Plus machines
Can be used in SDS Plus machines with roto-stop facility
Can be used in: heavy duty concrete, general concrete, hard bricks, soft bricks, lightweight blocks, natural stone, constructional granite, natural stone, limestone and mortar

£15.08 Incl. VAT

Determining stock availability

Armeg

250mm SDS+ Point

(G250B4P)

SDS Points are great for breaking out the core of material still in contact with the drilled substrate after core drilling
Designed for use in SDS Plus machines with roto-stop facility
For use in: heavy duty concrete, general concrete, hard bricks, soft bricks, lightweight blocks, natural stone, constructional granite, limestone and mortar

£10.94 Incl. VAT

Determining stock availability

Armeg

30mm SDS+ Channelling Chisel

(G225B4CC30)

Ideal for rapidly producing a 30mm channel in masonry for electrical conduit or pipe work
Cranked off set design maximises ease of use
Designed on an SDS Plus drive system for machines with roto-stop facility
Can be used in: soft brick, medium density block, lightweight block and natural stone

£49.93 Incl. VAT

Determining stock availability

Armeg

40mm Scutch Comb [Pack of 5]

(SCCOX5)

£5.15 Incl. VAT

Determining stock availability

Armeg

40mm SDS+ Wide Scaling Chisel

(G250B4SC)

Ideal for general masonry removal work
An everyday essential chisel, perfect for transmitting the hammer blow of SDS Plus machines
Wider than standard chisel for removal of masonry materials, chasing & levelling
Designed for use in SDS Plus machines with roto-stop facility
For use in: heavy duty concrete, general concrete, hard bricks, soft bricks, lightweight blocks, natural stone, constructional granite, limestone and mortar

£19.32 Incl. VAT

Determining stock availability

Armeg

55mm SDS+ Channelling Chisel

(G225B4CC50)

Ideal for rapidly producing a 55mm channel in masonry for double conduit runs or capping
Cranked off set design maximises ease of use
Designed on an SDS Plus Drive System for machines with roto-stop facility
Can be used in: soft brick, medium density block, lightweight block and natural stone

£58.86 Incl. VAT

Determining stock availability

Armeg

80mm Wide EBS Hard Material Chisel

(EBS.BSC.HM)

This 80mm wide chisel is ideal for producing repeated numbers of electrical back boxes in tough masonry
User convenience is assured by avoiding hours of labour intensive manual chiselling
Perfect for use in hard materials
Can be used in conjunction with the Electrical Box Sinking Range - remove the bulk of masonry material with the EBS Round Cutter, then remove the corners with this robust chisel
Can be used in: heavy duty concrete, general Concrete, hard bricks, soft bricks, lightweight blocks, natural stone, constructional granite, limestone and mortar

£35.16 Incl. VAT

Determining stock availability

Armeg

SDS+ Scutch Comb Chisel

(G150B4SCH)

The SDS Plus Scutch Comb Chisel is the perfect choice for general electricians preparation work in masonry
The hammer action chisel is purpose designed for masonry dressing, levelling uneven masonry surfaces and forming channels / back box holes etc
40mm wide and 25mm wide versions available
Designed for use in SDS Plus machines with roto-stop facility

£42.43 Incl. VAT

Determining stock availability

SDS Chisels

Filters

Blade Width

Brand

Chisel Type

Length

Shank Type